Include CO Detectors Into Your Security System
Putting carbon monoxide detectors in your property is a fantastic beginning, but you are able to boost your safety even more by integrating them into your home security system. By doing so, you’ll have another safeguard, as your monitoring agents will be notified whenever a CO detector goes off. This backup can prove to be vital, particularly if a crisis strikes in the early morning hours and you don’t hear the alarm.
Order CO Detectors In Dothan With Your Home Security System
Keep your family protected against all kinds of threats with a full-featured home security system from Secure24 Alarm Systems. Our CO and smoke alarms in Dothan are professionally monitored like your other security components. You’ll have backup from a dedicated, 24-7 team whenever an urgent event occurs. Call (334) 219-8334 today to customize the defense of your family and home.
Where To Place Carbon Monoxide Detectors In Your Dothan House
Homeowners must protect against a variety of risks like burglary, flooding, and fire. But what about a risk that you are unable to smell or see? Carbon monoxide is different from other risks because you might never realize it’s there. Despite that, using CO detectors can easily safeguard you and your household. Find out more about this hazardous gas and where to place carbon monoxide detectors in your Dothan home.
What Is Carbon Monoxide?
Called the silent killer due to its lack of odor, color, and taste, carbon monoxide is a readily found gas formed by an incomplete combustion of fuels. Any fuel-utilizing appliance like a furnace or fireplace may produce carbon monoxide. While you usually won’t have problems, issues can arise when an appliance is not regularly maintained or properly vented. These missteps can lead to a proliferation of the potentially lethal gas in your interior. Generators and heaters of various types are the most frequent culprits for CO poisoning.
When exposed to low amounts of CO, you may experience fatigue, headaches, dizziness nausea, or vomiting. Prolonged exposure to higher concentrations can cause cardiorespiratory failure, coma, and death.
Recommendations For Where To Place Dothan Carbon Monoxide Detectors
If you don’t have a carbon monoxide detector in your interior, buy one now. Preferably, you ought to have one on every floor of your home, including basements. Here are several recommendations on where to place carbon monoxide detectors in Dothan:
- Put them on every floor, especially in areas where you have fuel-burning appliances, including furnaces, water heaters, fireplaces, and gas dryers.
- You should always install one no more than 10 feet away from bedroom areas. If you only get one CO detector, this is the place for it.
- install them approximately 10 to 20 feet away from potential CO sources.
- Avoid installing them right above or next to fuel-consuming appliances, as a little carbon monoxide might be discharged when they start and trigger a false alarm.
- Secure them to walls at least five feet from the ground so they can sample air where inhabitants are breathing it.
- Avoid putting them in dead-air areas and next to windows or doors.
- Place one in areas above attached garages.
Inspect your CO detectors often and maintain them according to manufacturer guidelines. You will typically need to replace them every five to six years. You should also make sure any fuel-utilizing appliances are in in optimal working order and adequately vented.